Data Centre Plumbing & Drainage Piping in Malaysia

The plumbing scope on a data centre

DC plumbing is four distinct scopes wearing one label:

• Potable water — the incoming main and internal distribution to pantries, toilets, showers, and domestic water storage. This is the certified-product scope.
• Sanitary and waste — soil, waste, and vent (SWV) pipework from the fit-out areas.
• Rainwater and storm drainage — roof and podium drainage, often UPVC underground runs to the site drainage network.
• Process and cooling makeup water — the feed to cooling towers and water treatment plant, where the plumbing package hands over to the cooling package.

The trap is scale: because the package is small, it gets procured late and casually — and then an inspection rejects a potable line, or a makeup-water tie-in holds up cooling commissioning.

Material selection

Potable and pressure lines — HDPE PE100. Buried incoming services and distribution in PE100 HDPE pressure systems, selected by PN class against the design pressure. The PN10/PN16 selection logic (SDR, wall thickness, authority acceptance) is covered in PN10 vs PN16 HDPE pipes — read it before substituting classes. The published Hansen PE100 dimension schedule (20–50 mm, PN16/PN20) is on the HDPE spec table; larger diameters need the manufacturer catalogue, which we can supply with your quotation.

Larger incoming mains — MSCL. Where the incoming main or yard piping runs to larger diameters, mild steel cement lined (MSCL) pipe to SPAN TS 21827 is the Malaysian waterworks standard — our range is SIRIM-certified, and the dimension schedule is on the MSCL spec table.

Drainage — UPVC underground. Sanitary discharge, rainwater leaders, and estate drainage in UPVC underground drainage & sewerage systems — the standard SIRIM-certified solution for Malaysian building drainage.

Stainless steel — where the specification calls for it: water treatment plant, process lines, and premium potable runs in plant rooms.

SIRIM / SPAN certification context

The potable scope is where certification stops being a preference. Water authorities and consultants check SIRIM certification on potable and drainage plastics at inspection, and steel water mains fall under SPAN technical standards (SPAN TS 21827 for MSCL). The full picture — what certification verifies, when non-SIRIM ranges are legitimate, and how to check delivered pipe — is in SIRIM vs non-SIRIM pipes.

The working rule from that article applies directly here: if there is an inspection, assume certification is checked. Confirm acceptance with the authority having jurisdiction, and ask us to state certification status per line in the quotation. For the wider waterworks compliance context, see the water reticulation hub.

Specification checklist

Buying the plumbing package from Sanifix

Sanifix supplies HDPE (pressure) systems, MSCL pipes (SIRIM, SPAN TS 21827), UPVC underground drainage & sewerage, and stainless steel pipes & fittings for DC plumbing packages. Send your plumbing BOQ for a line-by-line quotation across all four systems — with certification status stated per line. All four DC trade packages are covered on the data centre hub.